How To Configure Wireless Adsl Dlink 2730u Router + Modem

 D link 2730u Adsl wireless modem + router configuration setup guide.

D link 2730u adsl modem + router s

DLink 2730u PPPoE Settings

  • Open Internet Explorer.
  • Go to Router menu by typing the url http://192.168.1.1 
  • Enter Username = admin & Password = admin
Dlink 2730u router modem admin

  • Click On Advanced Setup
    • Click on Add.
Dlink 2730u router modem advanced setup

  • Enter VPI & VCI values as provided by your internet service provider (ISP).
  • For Bsnl: VPI = 0, VCI = 35,    For MTNL: VPI = 0, VCI = 32
  • For Airtel: VPI = 1, VCI = 32,  For  VSNL: VPI = 0, VCI = 33
  • Leave the other settings as default and save the settings.
Dlink 2730u router modem setup

  • Now Click On WAN Service and Setup the WAN (Wide Area Network)
  •  Click Add button.
Dlink 2730u router modem wan setup
  • Click Next button.
Dlink 2730u router modem wan setup 2
  • Select PPP over Ethernet (PPPoE) and Click Next.
Dlink 2730u router modem wan setup 3
  • Enter PPP Username & PPP Password provided by your ISP
  • Enter PPPoE Service Name anything as you wish.
  • Authentication Method = AUTO
  • Enable the Firewall option.
  • Leave the other Settings as default and Click Next.
Dlink 2730u router modem wan setup 3

  • Click Next.
Dlink 2730u router modem wan setup 4

  • Tick the Select DNS Server Interface from available WAN interfaces & Click Next.
Dlink 2730u router modem wan setup 5

  • Now Click Apply/Save Button.
Dlink 2730u router modem wan setup 6

  • That’s it Now You have successfully created the WAN ( Wide Area Network)
Dlink 2730u router modem wan setup 7

D-Link 2730u Modem + Router Wireless (Wifi) Configuration

  • Now Open the Wireless Settings.
    • Tick Enable Wireless
    • Select Your Country.
  • Leave the other settings as default & Click Apply/Save button.
Dlink 2730u router modem wireless wifi setup 1

  • Now open Security.
    • Enable WPS = Disabled.
    • Select SSID = Dlink
    • Network Authentication = WPA-Personal & Auto
    • WPA/WAPI PassPhrase = Any Password.
    • WPA Group Rekey Interface = 0
    • WPA/WAPI Encryption = TKIP + AES
  • Apply & Save the settings.
Dlink 2730u router modem wireless wifi setup 2

Set  (TCP/IPv4) – Settings

  • Go to Control panel and open Network and Sharing Center
Dlink 2730u router modem Lan setup 1
  • Click on Change adapter settings.
Dlink 2730u router modem Lan setup 2
  • Right Click on  Local Area Connection (Lan)
  • Open Properties.
Dlink 2730u router modem Lan setup 3
  • Select Internet Protocol Version 4(TCP/IPv4)
  • Open Properties.
Dlink 2730u router modem Lan setup 5
  • Select Use the following IP address:
  • Enter IP address = 192.168.1.55
  • Subnet mask = 255.255.255.0
  • Default gateway = 192.168.1.1
  • preferred DNS server = 192.168.1.1
  • press Ok and save settings.
Dlink 2730u router modem Lan setup 5

That’s it you have successfully configured your internet connecting using the dlink 2730u Router. If you have any doubts please ask in comments.

About krishna

I am a tech lover. just wander around the net for the latest tech news. I like to share the intresting news to freinds.

Comments

  1. nice post

  2. very nice post .many thanks you.

  3. Hi I got Dlink 2730u recently wjhen I am trying to do settings, in the menu I am not able to see \\”Wireless\\” option to setup wifi for modern. Please let me know I missed any setups from my end.Thanks in AdvanceKrishna

    • Once reset your modem.
      At back side of modem there will be reset button. press it using a pin. then check whether the wireless option appears or not.
      if it din’t appears take a screen shot of your modem admin menu and give me the link.

  4. hello !
    when i change WPS tu disable T i can’t set the Network Authentication !!! that is none !!!
    when change Network Authentication to WPA T WPS enable automatic !!!
    plz help me for disable WPS
    sry for my bad english

  5. hey,
    can you please help me out to configure adsl 2730u with tikona connection …because the settings are totally changed as from above mentioned screenshots.

Speak Your Mind

*